Blinker issue-71 Duster A01

[340wedge]

On my Duster I have the AO1 light package (fender mounted turn signals) Ralle Dash- Since I have owned the car, the driver's side "Dash" indicater flashes, but the driver's side fender indicator does not flash. The passenger side fender indicator works but the Dash indicator does Not flash. So the opposites sides work. I have replaced the bulbs, and the circuit board. Is is possible the circuit is such that if one fender indicator is not working it causes the dash indicator opposite side not to work?:coffee2: Thank you.

 

[67Dart273]

No. You have two "unrelated" problems.

"How this works" is there is a left front and right front wires coming out of the turn signal switch. These branch off and feed up to the indicators on the cluster. They also feed out through the bulkhead connector to the front TS bulbs, and branch off and feed the fender indicators.

One thing to find out is if you do or did have the gas mileage gizmo, I'll think of it here, "milage master" or some nonsense. had a relay and vacuum switch that hooked to the left fender indicator to help remind you to "stay off" the gas

Here we go, "Fuel Pacer"

http://www.forabodiesonly.com/mopar/showthread.php?t=221091

If you don't have a service manual, you can download them, free, from MyMopar. Some of those there, came from the guys here at FABO

http://www.mymopar.com/index.php?pid=31