brake light wiring help please

[63VALIANT*KISS]

if i could pick a couple peoples brain here for this tough question.so first time i went to the shop and they "fixed" my brak lights they went out i took it back and they said i needed a new turn signal switch but he bent the copper down cause it wasnt touching right so the light didnt come on. anyways now there both not working i want to know exactly where the wires end from the tail lights to the dash where do they go i need to check connections with my geez it slipped my mind its my screwdriver with a ground and light but yea please if someone can tell me where to look the turn signal still works just the brake lights.

 

[waggin]

under the dash,lil switch mounted to the steering column brake pedal support,has a pink and a white wire leading to the switch,pink is hot and white leads to the turn signal switch then to the brake lights,the switch has a bolt that holds it to the column brace and is the adjustment

 

[63VALIANT*KISS]

so it runs along drivers side then goes from green and blk to pink and white? where does it turn into those

 

[Valiant422]

Screwdriver with the light and ground = test light

 

[63VALIANT*KISS]

got it ! burnt fuse couldnt see it last night in the dark i also had to play with the directional indacator switch but yea and thanks for reminding me test light! thanks for all the great help guys any one have a switch for cheap that works.?

 

[waggin]

take it apart and clean it be careful of the lil plastic blocks that slide back and forth noting wich way they are installed befor you remove them,usually a new turn signal cam is all that is needed....vansautollc on ebay sells em and gas tanks and sending units,

got it ! burnt fuse couldnt see it last night in the dark i also had to play with the directional indacator switch but yea and thanks for reminding me test light! thanks for all the great help guys any one have a switch for cheap that works.?

 

[63VALIANT*KISS]

nah i got a new cam its the switch i think the dude at the shop told me the copper is fatiged