The crane ones I have seen have there name on the under sideDuctile iron Mopar, Crane, Erson and the like. All about the same good quality. They appear to be stock, 1.5 ratio.
The crane ones I have seen have there name on the under side
Thanks for the info but not going to be using them... I run sb and pick these up in trade so just wanted to identify them to get a price for what there worthI have seen all three types I mentioned with and without names. It all depends on the production run. As far as I could tell, they may well all three have been cast by the same foundry. They are all extremely similar in looks and quality. If you send those to Gary at Rocker Arms Unlimited, he can bush them and correct and geometry differences. Once he gets done with them, they will handle a .650 plus lift roller. Probably come close now, but for a reasonable amount they can be made virtually bulletproof.
Thanks for the info but not going to be using them... I run sb and pick these up in trade so just wanted to identify them to get a price for what there worth
I agree with Bighead, as I have the same rockers, upgraded to ARP adjusters.
I went to double check and it’s just the nuts that say ARP.