Check out what I got!

[younggun2.0]

I finally pulled the trigger and bought a bill Mitchell aluminum block! 4.5” bore, cross bolted mains, billet steel caps.

 

[LO23M8B]

I just have to ask, how much.

 

[fishmens67]

Yea buddy ! Time to make some real power.

 

[Professor Fate]

I finally pulled the trigger and bought a bill Mitchell aluminum block! 4.5” bore, cross bolted mains, billet steel caps.

View attachment 1716047955

View attachment 1716047956

View attachment 1716047957

Looks like a work of art!

 

[Garrett Ellison]

DAING! I’m green with envy! Now the question is, how much stroke and what heads are you going to use?

 

[fishmens67]

I just have to ask, how much.

I imagine around 7 grand.

 

[Jeremiah (jd)]

That is a very nice block. What's the rest of your plan?

 

[MidnightSwinger]

Sick

 

[TT5.9mag]

Whoa, I’m liking where this will be going.

 

[fishmens67]

Whoa, I’m liking where this will be going.

Me too, John doesn't fart around, he always gets the good stuff. Spares nothing.

 

[MMissile]

Excellent!
Check it out, well. My friend bought a Mitchell hemi block, and one of the cam bearing bores wasn't finished. They're fixing it.

 

[missing linc]

Badass!

 

[TT5.9mag]

Me too, John doesn't fart around, he always gets the good stuff. Spares nothing.

And his work (at least from photos here) is top notch quality.

 

[younggun2.0]

I just have to ask, how much.

Are you seated? $6800

 

[younggun2.0]

Yea buddy ! Time to make some real power.

Going 4.5” bore, 4.5”
Stroke, 572” with 10.7:1 and solid roller, trick flow 270cc heads, tunnel ram with twin 4500’s

 

[younggun2.0]

DAING! I’m green with envy! Now the question is, how much stroke and what heads are you going to use?

4.5” stroke, trick flow 270cc heads, max wedge ports and tunnel ram with twin dominators.

 

[mopowers]

What are the plans???

Edit- Just saw plans were posted. This will be fun to follow!!!

 

[younggun2.0]

That is a very nice block. What's the rest of your plan?

Looking for 900hp on pump gas. 572” build. 4.5” stroke. 10.7:1 compression, solid roller .700ish lift 270ish @ .050 duration, trick flow 270cc heads, max wedge tunnel ram with twin dominators.

 

[fishmens67]

I'm sure you will exceed your goal.

 

[diymirage]

Looking for 900hp on pump gas. 572” build. 4.5” stroke. 10.7:1 compression, solid roller .700ish lift 270ish @ .050 duration, trick flow 270cc heads, max wedge tunnel ram with twin dominators.

What, no blower ?
Quit being a cheapskate!

 

[younggun2.0]

What, no blower ?
Quit being a cheapskate!

I took on a paper route to buy the block!

 

[TT5.9mag]

Please do start a build thread when you put this all together.

 

[rumblefish360]

HO-Lee-sheeeeiot!!!!!

First up, congrats. Best wishes on the build.
May it exceed your expectations and dreams.

 

[Jeremiah (jd)]

Looking for 900hp on pump gas. 572” build. 4.5” stroke. 10.7:1 compression, solid roller .700ish lift 270ish @ .050 duration, trick flow 270cc heads, max wedge tunnel ram with twin dominators.

I don't see 900hp being too far out of line for a 572. Do you have the cam yet? I would think you would need something in the 280+ duration and more lift to make that power with those heads. Will you run them OOTB?

 

[66340SEDAN]

Set a steel big block on a folding table like that lol…..very nice!