Bought the kit with all the rollers and it came with 8 round paper gaskets and 4 rubber sleeves I'll call them! Do the gaskets and sleeves get used? My car didnt have them in there? If so where do they go? The inside diameter on the gasket is too small to fit on any of the studs the roller go on! They are at the bottom of my picture.
Dart quarter window rolled kit question
- Thread starter sammie
- Start date
-
For either side of the bolts that hold the glass to the aluminum.
The glass is held in only by glass stting tape to the frame!
Interesting, maybe different years-different applications.
Mines a 68, I have round washer things.
Mines a 68, I have round washer things.
I should have bought the kit for $20 less that didnt have all theses gaskets! Live and learn! Thx guys
My picture was a zoom in for better view,
2 bolts per window, 2 washers per bolt, 2 sides per car, probably will drop 1 down in the gap between the rocker & outer panel to join my 7/16 combination wrench, so I could very well use more than the 8 provided.
-
