Descent rev limiter for MP electronic ignition?

[swinger340]

Looking to keep my MP electronic ignition, but install a rev limiter. Have to much money in my stroker to over rev and ruin it. Open to any good recommendations? I have seen units that hook to you existing ignition, but have never actually used one.

 

[68sedan]

http://www.summitracing.com/parts/pnx-600/overview/
this is what I use on my pull truck.it was easy to install,easy to adjust and it works.

 

[clinteg]

A friend likes to run the MSD Soft touch. May look into that.

 

[67Dart273]

Mallory made some rev limit tachs, don't know how good or bad they were

 

[cuda20]

I have one of those Mallory rev limiting tachs. Has rev light built in. 11000 rpm. Two nobs on front, one to set light and other for rev limiter. Worked real good.Think I even have the original instructions.

 

[fastbackmopar]

If you don't want the extra wiring and box try the Rev-N-Nator from R/T garage. I know they have the rev limiter built into the ignition module.

 

[DT440]

I had one of the Mallory rev limiting tachs, worked good for about 15 years. Replaced with a Rev-N-Nator from R/T garage. So far so good.