Die grinder and bits for porting- it's been a while

[Cruisingram]

Tips, hints or advice on buying a new die grinder to clean up and port match my heads/Manifolds, plus working on the exhaust manifold as well. 40 years ago I bought a giant electric die grinder and ported heads on the daily. Now it's been probably, at least 20 years? Since I did my last job, don't have that die grinder anymore! Anyone have one they really like? I prefer Electric to Air, simply because I don't want to have to worry if I got enough volume out of a compressor to make it happen. Best place to buy bits? Any advice here will be appreciated.

 

[abdywgn]

I have an old Craftsman model that I bought...40(?) years ago. Like it and it worked good last time it was out chewing up metal. If not new, garage/estate sales? sorry, not much help.

 

[dogbreath]

Makita with separate speed control

 

[volaredon]

Not much help im sure (sorry) but air power is much better for something like that

 

[4spdragtop]

These come highly recommended by @Newbomb Turk Killer carbides
https://m.facebook.com/100066611109056/

 

[ch1ll]

I recently bought a Hercules eletric from harbor freight. I haven't used it much, but it's well balanced and light. I believe it's variable speed.

 

[dogbreath]

Problem with air is you'll run out of it long before you run out of electricity

 

[Cruisingram]

Problem with air is you'll run out of it long before you run out of electricity

Especially off grid having to run a power mad compressor LOL.

 

[Cruisingram]

https://www.amazon.com/DEWALT-DWE4887N-1-1-2-Inch-Grinder/dp/B00SHAW3VY/?tag=fabo03-20 got this one on the way

 

[ch1ll]

I recently bought a Hercules eletric from harbor freight. I haven't used it much, but it's well balanced and light. I believe it's variable speed.

Just looked at it and it's not variable speed.

 

[ch1ll]

https://www.amazon.com/DEWALT-DWE4887N-1-1-2-Inch-Grinder/dp/B00SHAW3VY/?tag=fabo03-20 got this one on the way

I got my Hercules for $70 something and I feel good about that, but I got to admit I like the paddle trigger on the dewalt better, just not for twice the money.

 

[4spdragtop]

I like the thoughts of adding a foot pedal if possible, something like a sb cabinet would have, but variable?

 

[Yote]

Just my observation, which you probably know. With what little I have done, using a lubricant makes using the tool smoother with less grabbing and jumping. I used wd-40 which worked for me. It also keeps the chips from flying so bad.
Yote