Duals on a 273 Commando

[Dave]

Does anyone know of anybody that manufactures a dual exhaust set up for a 273 commando (67 Barracuda) that utilizes the factory manifolds, I don't want to go with headers. I wanted to install the system myself?

 

[dusterdon]

Any decent muffler shop can bend you up a system rather easily. Don't know of any prepackaged kits for that car.

 

[cavemanmoron]

My Local Midas did the job for me, it was about $450. if I recall.

I brought the mufflers I wanted to use, with me {Dynomax Super Turbo's}
and the Chrome tips.

It was worth the money to me. :thumblef:

 

[Art Clark III]

Does anyone know of anybody that manufactures a dual exhaust set up for a 273 commando (67 Barracuda) that utilizes the factory manifolds, I don't want to go with headers. I wanted to install the system myself?

Yea, TTi does.

 

[Hammerhead]

Look at Accurate Exhaust. I put a dual set up on my 68 Valiant with 318 and manifolds and they had every thing I needed in one kit. Car was originally a /6 and I received all the hangers to make it duals. Cost just under 800 with mufflers and shipped from oregon to NJ. Took about 3 hours to get it in. All the pipes are bent perfectly and it sounds like I have waaayy more than the 318 2bbl in it.

 

[lou3500]

I just had new duals installed on my 66 cuda 273 manifolds to bumper 2 1/4 to 2 1/2 magnapacks to 2 1/4 to 2 1/2 oval stainless tips,sounds awsome and priced around 5 bills.

 

[grimreaper]

TTI http://www.ttiexhaust.com/Exhaust-X/XhaustSystems.htm

You will need to modify your existing crossmember for clearance.

 

[RedFish]

Right side pipe in picture above is too close to the fuel tank for my liking.
The single left to right tank strap can be a problem in pre 68 applications also.
Good luck