early a trans crossmember

[MILO]

This one on e-pay says its for a 63 or 64 it looks differant than the ones that I have seen I wonder if it would work for dual exhaust or is it listed wrong.

http://cgi.ebay.com/ebaymotors/ws/e...19&item=260728507519&viewitem=&category=34208

 

[mcadoocrew]

That doesn't look like the one out of my 64 Dart GT ..... or my 66 Dart GT

 

[66plyValiant]

looks like it may have been modified

 

[mcadoocrew]

it REALLY looks like a B body crossmember - I have a few from 69 Satellite ...and my 71 and 72 Chargers...looks pretty much just like this one...It may have been modified for an A body..

 

[pishta]

my '65 A crossmember has the trans mount right socket where that plate is and doesn't have that bracket thingy.

 

[Valiantsignet20]

It looks like it's been modified for a longer tail shaft and a spool mount. I done this one time installing a van 833 in my Valiant. The cross member itself looks like its from a latter a with the exhaust humps. I don't think it will work on yours without cutting the cross member down on the passenger side.

 

[grimreaper]

The early A should look like this:

This one happens to be notched for dual exhaust. The original would be a smooth slope from the bottom to the lower right edge. (left side in this photo)

 

[pishta]

and here is a 66 B-body crossmember, curiously similiar...

 

[Sulring]

Anybody know if they are different/same? Application is for a 1965 Barracuda, AT....

Thanks-

 

[65 Dartman]

Anybody know if they are different/same? Application is for a 1965 Barracuda, AT....

Thanks-

Same for auto or stick.