[Found!] Early Barracuda Sway Bar Help

-
Status
Not open for further replies.
eekvonzipper

eekvonzipper

My Member is Legendary!
FABO Gold Member
Joined
Apr 18, 2020
Messages
1,829
Reaction score
2,258
Location
Cadet, Missouri
Rating - 100%
19   0   0
Contact seller
1st) Does anyone have a Stock Front Sway-Bar for an Early Barracuda For Sale?
2nd) Will it attach with the Pre-drilled Holes that I already have in My K-Frame?
3rd) Do I have the Correct LCA's to go with a Stock '65 Sway-Bar?
I was told My Recently Purchased LCA's we're '67&up?
Thanks to All!

K frame.jpg


correct lca.jpg
 
Pretty sure you need to drill holes in the K frame for the swaybar brackets but that’s no problem....The early a-body has a unique sway bar, 65-66 only, 67 up is different but those 67 Lower control arms should work just fine with the tabs
 
66340SEDAN said:
Pretty sure you need to drill holes in the K frame for the swaybar brackets but that’s no problem....The early a-body has a unique sway bar, 65-66 only, 67 up is different but those 67 Lower control arms should work just fine with the tabs
Click to expand...

The holes are there. Just add sway bar and brackets. Lower arms are good to go.
 

Status
Not open for further replies.
-

Similar threads

Bossanova5
Differences between 65 Barracuda and 65 Valiant Lower Control Arms For Sway Bar Installation?
Replies
5
Views
716
cudamark
cudamark
F
aftermarket hollow front sway bar 74 dart K frame
Replies
4
Views
483
fueliedart
F
sin
What SWAY BAR to choose？
Replies
16
Views
1K
Dcuda69
Dcuda69
dowboy1970
Front sway bar identification help.
Replies
7
Views
649
autoxcuda
autoxcuda
WAYNE0
FRONT SWAY BAR
Replies
6
Views
561
Commando66
Commando66
Back
Top Bottom