[Found!] Early Barracuda Sway Bar Help

-
Status
Not open for further replies.
eekvonzipper

eekvonzipper

My Member is Legendary!
FABO Gold Member
Joined
Apr 18, 2020
Messages
1,485
Reaction score
1,559
Location
Cadet, Missouri
Rating - 100%
16   0   0
Contact seller
1st) Does anyone have a Stock Front Sway-Bar for an Early Barracuda For Sale?
2nd) Will it attach with the Pre-drilled Holes that I already have in My K-Frame?
3rd) Do I have the Correct LCA's to go with a Stock '65 Sway-Bar?
I was told My Recently Purchased LCA's we're '67&up?
Thanks to All!

K frame.jpg


correct lca.jpg
 
Pretty sure you need to drill holes in the K frame for the swaybar brackets but that’s no problem....The early a-body has a unique sway bar, 65-66 only, 67 up is different but those 67 Lower control arms should work just fine with the tabs
 
66340SEDAN said:
Pretty sure you need to drill holes in the K frame for the swaybar brackets but that’s no problem....The early a-body has a unique sway bar, 65-66 only, 67 up is different but those 67 Lower control arms should work just fine with the tabs
Click to expand...

The holes are there. Just add sway bar and brackets. Lower arms are good to go.
 
I just painted and re-installed my factory '65 sway bar (I previously retrofitted some aftermarket rubber bushings that fit under the brackets on the K-Frame):

red sway bar.JPG


sway bar 1.JPG


sway bar 2.JPG


sway bar 3.JPG


sway bar 4.JPG


sway bar 5.JPG


sway bar 6.JPG


sway bar 7.JPG
 
Status
Not open for further replies.
-

Back
Top