exhaust tips

[240 gordy]

How long are the exhaust tips on a 60 340 Swinger, looking for one that will take 2 1/2 exhaust and still look the same as original..

 

[Inertia]

I had a coupla original sets with small inlets, I just chopped the small inlet off at the appropriate size, and welded on the connector size I needed.. just saying..

 

[240 gordy]

I had a coupla original sets with small inlets, I just chopped the small inlet off at the appropriate size, and welded on the connector size I needed.. just saying..

Might try that, thanks..

 

[str12-340]

slip the new pipe over the original small inlet and mark and cut then weld in new pipe... easy peasy. use a pipe the slips OVER your tailpipe, not inside like factory. Accurate limited sells stainless tips that look factory with a variety of inlet sizes.

 

[240 gordy]

slip the new pipe over the original small inlet and mark and cut then weld in new pipe... easy peasy. use a pipe the slips OVER your tailpipe, not inside like factory. Accurate limited sells stainless tips that look factory with a variety of inlet sizes.

Thanks, will look into them..

 

[aaronk785]

I bought mine off ebay 2.5 for about a 100 bucks

 

[240 gordy]

I bought mine off ebay 2.5 for about a 100 bucks

Going to do the same thing..

 

[Mrpatel]

Pg classic or Be&a have them up to 3”