[SOLD] fresh 410 stroker project

[discharger1332]

I have a 410 strocker project I have decided to sell. It is in the machine shop as I type. It should be ready in the next week or two. It consists of the following parts:
1971 360 block, .030 over
scat nodular(cast) iron 4" crank
Kb 356 .030 hyperectic pistons
Mp forged floating pin rods(came in a mopar crate motor) dont recall part #
Clevite 77 bearings
Perfect circle rings
Pair of 587 340 heads from Aerohead Racing, 2.02 int. 1.88 ex. Ihad them ported by a member here (1wild&crazyguy)I have over 1k in these heads.
Edelbrock performer rpm intake (used with low miles) looks new.
I have a set of brass freze plugs and a true roller timing chain and a melling H.V.72. for it I will throw in as well as a timing cover and oil pan.

It is in the machine shop in huntington beach ca. I will pay the balance to get it out, unless you want to have them go further with it. I can put you in contact with the machine shop or we can meet up there. or i can pick it all up and go from there. local sale prefered. the pix are from before it went to the machine shop. $2,000.00 for everything

 

[tomswheels]

Pm sent

 

[woody30]

Too bad you're in California.

 

[winstoninwisc]

do you want to sell intake and heads ? what cam are the heads set up for I have the bottom end of a 408 LA engine ready

 

[Abodybomber]

My god,that's a steal. Mine cost twice that,just on the short block.

 

[discharger1332]

it really is a deal, I am going to loose $$$ on the deal. anyways. i finally picked the stuff up from machine shop. the wrist pins are dameged, so they will need replaced. everything else is ready to go. i have a local who wants to have a look on monday, but as promissed i am updating the ad.i know a few guys were also interested.

 

[dusterdan]

What machine shop did the work if you don't mind sharing? Are you happy with the results? GLWTS!

 

[2manymopars]

Damm! looking for a forged crank. Got a wagon and some cash.

 

[discharger1332]

Sold!!!

 

[evilred73]

Hey Dustin, great meeting you!
We'll see you soon,, Wish you luck on the up comings.

Noah