Fuel line size

[Nite Moves]

First i have searched some here with no luck..I have a 67 Dart with a small block. Im sure fuel line size from tank to pump is 3/8........Is this correct. Im getting 3/8 as a answer but also 5/16. I just want the correct size. Thanks

 

[Snake]

3/8,are you close to firering her up yet Ed

 

[Nite Moves]

Soon maybe...depends...I have to put $2,500 in the truck or sell it???????????????????Dont know what to do.

 

[crackedback]

5/16"

 

[4404spd]

5/16 is stock.

 

[Nite Moves]

5/16..........:banghead: This is why im asking. I dont know crap. Thanks everyone.

 

[67Dart273]

fiveshitstinks

 

[604 Racing]

/6 cars had the smallest lines, v8 cars hve 3/8

i run 1/2 some people say its to much, comparing it , to FI cars that runn 600hp on 3/8, but not taking into consideration the PSI from FI pumps

ill be around 600ish HP with the new stroker build for my 71, 1/2 lin, at 7psi with an internally regulated pump, and another regulator before the carb, no return line.;

 

[green1]

Never saw a 3/8 on a factory mopar. Think about this; Unless you are running huge, high rpm; how big are your needles and seats? what can they flow? Theory is, 5/16" fine (think hemis came with it). Bigger line, g forces push the fuel backwards, less surface friction on the fuel/interior tube wall.

 

[jimjimjimmy]

i never saw 3/8 on a stock mopar either

 

[1968FormulaS340]

It is 5/16.

 

[RustyRatRod]

Sorry guys, Max Wedges, Hemis and 440 Six Packs came with 3/8 line.

 

[metallidart]

604 racing your avatar made me forget what this thread was about. Does it everytime.

 

[Vitamin c]

69 1/2 6bbl, 5/16!

 

[abodyjoe]

its 5/16. anything small block and most big blocks are 5 1/16.

 

[604 Racing]

i never saw 3/8 on a stock mopar either

my bad, i menat 1/4 and 5/16

 

[Bad Sport]

/6 cars had the smallest lines, v8 cars hve 3/8

I have a factory V8 car and it's 5/16's