I've seen a few guys here use the GM type II PS pump , since my engine came without a pump I will be doing the same , but before I go ordering the pump and Chrysler pulley .
I notice there are two shaft sizes available on the GM pumps 5/8 and 3/4 .
which one is the closest fit to the Chrysler pulley , also which belt did you use I came up with Gates K060810 from some of the pictures I've seen here .
I notice there are two shaft sizes available on the GM pumps 5/8 and 3/4 .
which one is the closest fit to the Chrysler pulley , also which belt did you use I came up with Gates K060810 from some of the pictures I've seen here .