darndart
Well-Known Member
Does anyone have a source for stock style head bolts? For a restoration build. I am not looking for ARP, I would like a stock style bolt with 3/4 inch hex head.
I did a search online and it looks like everyone is out of stock.Maybe look at Pioneer.
I really appreciate the offer. I actually have a set of used bolts. Just wanted to see if new were available.I believe Magnum heads have one top row bolt per side that are different than LA heads.
PM sent.
But I had a GF that was...I believe factory head bolts are better than grade 8. I think they are either a 10 or 12.
Besides "all that" I have used literally hundreds of used head bolts sets through the years and not broken the first one. Nor have I ever seen one break. I'd have no problem using a set again. They are not stretch to yield bolts.
But I had a GF that was...
I would just reuse the old ones unless they are damaged or you are building a high HP or rpm engine .
I believe factory head bolts are better than grade 8. I think they are either a 10 or 12.
Besides "all that" I have used literally hundreds of used head bolts sets through the years and not broken the first one. Nor have I ever seen one break. I'd have no problem using a set again. They are not stretch to yield bolts.
What bolts wouldn’t you use again besides Rod bolts? I’ve read(no actual experience) that all TTY bolts shouldn’t be reused.
What bolts wouldn’t you use again besides Rod bolts? I’ve read(no actual experience) that all TTY bolts shouldn’t be reused.