Heater line block off.

[Crazy4408pac]

Not running a heater, so don't need the lines from the engine to the firewall. Any suggestions as to how to block them off? I'm thinking of using plugs, at the engine and teflon tape.
Thanks

 

[tekslk]

At the fire wall just take a piece of hose from one to the other. Off the water pump use a piece of pipe inside the hose, couple of clamps and go.

 

[74DartSwinger360]

Used these rubber plugs on heater core and the previous owner of the engine had used a piece of wood and hammered it into the nipple on the water pump but I put a runner cap on it to be safe.
These look way better and perform the same purpose as looping a hose
Keeps the engine bay all nice and tidy

 

[jefflock]

Put a plug in place of the fitting on the intake and thread the hole on the water pump for a pipe plug.

 

[jacksdodges]

jefflock is dead on. I then filled the allen hole with JB weld paint it and it looks great.