Dizzydean
Well-Known Member
Well seeing how everyone is out of stock on the head studs were putting it together with the bolts. More as we get it assembled. Oops sorry about the girlfriend shot :cheers:
x2 i had one on my coronet that did that:glasses2::hello2:Your /6 is looking GREAT !!
Just my thoughts on that breather if you don't mind :glasses2:
If it ever back fires and melts the foam it will suck peace's of it in your engine.
They look nice and all, but I have seen them taken off just to see parts of the filter gone.. Just keep a close eye on it and you will be fine , Just had to share :hello2: Dig'en the valve cover work you did!!
:glasses2::hello2:Your /6 is looking GREAT !!
Just my thoughts on that breather if you don't mind :glasses2:
If it ever back fires and melts the foam it will suck peace's of it in your engine.
They look nice and all, but I have seen them taken off just to see parts of the filter gone.. Just keep a close eye on it and you will be fine , Just had to share :hello2: Dig'en the valve cover work you did!!
The block and girlfriend are looking good.
Well the girlfriend ran away but I do have some updated engine shots...
Well run after her boy, the car can wait!!!!!!!!!!!!!!!!
I tried hemiroid but she melted :toothy7: Oh well back to the car I guess. 805 the carb and intake bolt pattern wont allow for turning the carb so it stay as is. Couldn't find an adaptor for the 90* rotation but I will have a brace made. Had to order the lower hose and have to run some rubber lines for the trans,connect fuel and washer hose. Just about there.
Well run after her boy, the car can wait!!!!!!!!!!!!!!!!
I tried hemiroid but she melted :toothy7: Oh well back to the car I guess. 805 the carb and intake bolt pattern wont allow for turning the carb so it stay as is. Couldn't find an adaptor for the 90* rotation but I will have a brace made. Had to order the lower hose and have to run some rubber lines for the trans,connect fuel and washer hose. Just about there.
PM 805moparkid he can tell you how to turn it.