Holly needle and seat problim.

-

Snake

Mopar Nut
Joined
May 22, 2006
Messages
9,455
Reaction score
491
Location
Belleville Canada
The threads were the needle and seat go into the float bowl are striped some what, I can get it to grab were the float would be at the right height,so even with that is there a heil-coil fix for holley float bowls.I got this carb for next to nothing so puting a little extra is no big deal.any thought out there.
 
well I jump the gun on this on.I turns out that the brass threads on the old neddel was toast installed a new one I had laying around and all is good.Thanks for the replys.
 
-
Back
Top