I see no #s on it I believe it's a 340 but what year and model. Thanks in advance !
I need an ID on an Exhaust Maniflod
- Thread starter RAT ROD AL
- Start date
-
HemiSSDart
Dartus Interuptus
68-70 340 A and E body but 70 with the numbers on the back
The numbers are cast in the back, not raised numbers. Sometimes they are very faint.
Well that's good news. But here's the back side. looks like a decent weld/repair. Now if I can get my $$ back on it. what would it be worth otherwise ?
Sorry Al, I think you've got a paper weight there. JMHO.
HemiSSDart
Dartus Interuptus
That doesn't look like a terrible job, I have seen MUCH worse! Probably still worth a couple hundred bucks...
That is a hard pass!
Well you win some & lose some. I think I had to give the guy $100 for this to get some other stuff,.
HemiSSDart
Dartus Interuptus
Could be MUCH worse, here is a passenger side 383 A-Body manifold I have...
What does it look like on the inside behind the repair? It might be a "patch" over a crack.
The crack might be able to be repaired rather than patched.
The crack might be able to be repaired rather than patched.
I would be willing to bet you can sell that to someone. A braze repair can hold up quite well on cast.
-
