Anyone ever use one of the Hemi offset plates to move the booster? Does the ‘73 and up booster clear the valve cover with the offset?
I plan to use a 68 or so Midland Ross booster with the stock mounting brackets on my 65 with a V8
so you are going to more of a B body setup with a 2 bolt MC?
No, it’s an A body booster. The brackets that raise the booster above the valve covers are stock A Body with the 4 mounting holes. I’ll get some pics this morning
The booster is roughly 8 inches side to side or 23/24 inches in diameter View attachment 1715841208
There is a very common small diameter booster available thru Jegs or Summit. Unsure of mounting pattern so may have to be adapted to the A-body bracket and you'd have use a later Mopar two bolt master cylinder. But far easier to find than the small diameter dual diaphram booster others have used/recommended. Per AJ/FormS it would seem the later A-Body single diaphram booster will clear.