lower control arm bushing

[Snake]

Looks like the lower control arm bushings is shot on the 69 dart.Can i get new ones for booth sides and is the lower control arm shaft and bushing all one piece.or can i reuse the shaft with new bushing.I have to admit i have not played with this area befor.anything i should beaware of guyssss.thanks the money pit is growing LOL.Don.

 

[6pk2goDemon]

The Moog brand lower bushings are Part #K791. You need 2 kits to do both sides. You will reuse your existing lca shaft.

There is alot of info here on FABO for replacing those with many different tips and styles of doing it. It's not the easiest job you'll ever do, but you'll learn a whole bunch more about your car....and maybe a few new four letter words along the way....:help:

Nice thing is if you get stuck, all you have to do is ask.

Here is a recent thread with some good info. I'm sure there are more.

http://www.forabodiesonly.com/mopar/showthread.php?t=40573

 

[Snake]

thank you sir i am sure it will go to a shop to press them in and then there will be no 4 letter words lol.its great to have this site with people like you to help .many reguards Don.

 

[Longgone]

I used a BMFH, a chisel, and a new vocabulary.