73dart360
Well-Known Member
Has anyone ran the LP commandos on a stroker how do they compare to the W2`s
yes as a matter of fact I do:Guitar Jones said:I like the chamber shape, reminds me of my small chamber W5's, as does the exhaust side. The only difference I can tell from pics is the intake port floor isn't raised like the W5 but there looks to be enough material there to do it. Nice looking heads, do you have flow numbers?
dartman366 said:yes as a matter of fact I do:
lift int ex
200 147.7 122.9
300 207.5 192.4
400 254.1 233.4
450 274.5 241.3
500 291.4 243.0
550 302.4 243.0
600 311.9 243.0
650 311.9 243.0
700 311.9 243.0
:toothy7:
It was a pleasure to post them for dartman366. (There his heads.)73dart360 said:Rumblefish those Commando`s look sweet -i will have a set before too long after the w2`s are built- Thanks for the pictures
Ryan moved them on out to a 2.05 intake, took 2.08's and cut them down and reworked them to his liking,,the commando's are concidered a w5 replacement, I know Ryan did a lot of work on these head's and it show's, my machinist is an old head porter by trade and is very good at it, and he said that these were as nice a set of head's as he has seen as far machine work and finish. :thumbup:Guitar Jones said:Very, very close to my W5's. You have just a bit more max flow on the intake (mine came in at 305) but my exhaust peaks at 251. Still very similiar flow characteristics, the low and mid lift numbers couldn't have been closer.
What size intake valve is that. Mine still have the 2.02 intakes.
dartman366 said:yes as a matter of fact I do:
lift int ex
200 147.7 122.9
300 207.5 192.4
400 254.1 233.4
450 274.5 241.3
500 291.4 243.0
550 302.4 243.0
600 311.9 243.0
650 311.9 243.0
700 311.9 243.0
:toothy7: