moparmat2000
Well-Known Member
Ok, so i am needing a rear package tray, or rear speaker deck as you younguns call it for my 67 notchback cuda. Mine was missing when i got the car, so I was going to just buy one until i found out these are $40 for no speaker slots, or $60 with speaker slots, and about $40 to ship it. Wow $100 for that. Really now its just a piece of cut out and painted masonite board.
So for those of you who are bucks down or just want to make your own, heres a how to. But first off i want to extend a special thanks to DesertRat. I put a thread out asking for a tracing of one of these. However, If it wasnt for him making me a tracing of his on some masking paper, this project would not have been possible.
For starters, you need either an old package tray or a tracing. I used the tracing. I unfolded it, and cut it out, then ironed it flat, and taped it to a sheet of masonite board i got for free. Then i traced it with a sharpie, cut it out, and sanded the edges smooth, and test fit in the car.
So for those of you who are bucks down or just want to make your own, heres a how to. But first off i want to extend a special thanks to DesertRat. I put a thread out asking for a tracing of one of these. However, If it wasnt for him making me a tracing of his on some masking paper, this project would not have been possible.
For starters, you need either an old package tray or a tracing. I used the tracing. I unfolded it, and cut it out, then ironed it flat, and taped it to a sheet of masonite board i got for free. Then i traced it with a sharpie, cut it out, and sanded the edges smooth, and test fit in the car.