Manifold gasket help please

[olddog12]

So Ive got what I think are 318 manifolds on 360 heads and need a little help.

I think this is the passenger side(one with the damper on it) and the number is 3830684 and the other is 2843953.

The gaskets that I have dont fit very good at all and when I call Napa what should I tell them I need, gaskets for a 318 or a 360? I have no idea what the gaskets I have are off so thats part of my problem.

Thanks guys.

 

[Abodybomber]

So Ive got what I think are 318 manifolds on 360 heads and need a little help.

I think this is the passenger side(one with the damper on it) and the number is 3830684 and the other is 2843953.

The gaskets that I have dont fit very good at all and when I call Napa what should I tell them I need, gaskets for a 318 or a 360? I have no idea what the gaskets I have are off so thats part of my problem.

Thanks guys.

Any chance of a picture, of your manifolds & used gaskets?..... Gotta start ,somewhere....

 

[olddog12]

Sure thing sir.

 

[Lelo Dart]

Not sure but it looks like you have two manifolds from the same side. Does the smaller one on the left in the pic have a plugged hole for the heat riser also?

 

[olddog12]

Not sure but it looks like you have two manifolds from the same side. Does the smaller one on the left in the pic have a plugged hole for the heat riser also?

I just went and checked, the hole hasn't been plugged. The smaller one never had a heat riser in it.

 

[Abodybomber]

Found this....https://www.google.com/url?sa=t&sou...u1WVT1MEkY6R_1Qbg&sig2=7DoGI4zPT3eHDUC6zlfKdA

 

[Abodybomber]

I would match up gaskets with the exhaust ports on the heads.....