I am looking at air compressors and can only do a 110v deal due to my house electric. I want to a compressor that I can paint with but I know finding one with ~ 15 CFM and 20-ish psi in a 110v compressor is probably impossible.
My question is if anyone here is familiar with any guns that will spray (small stuff / not a whole car) with a lower rated compressor? I am looking at this one :
https://www.homedepot.com/p/Califor...-Free-Electric-Air-Compressor-20020/312624543
I am just looking at running air tools like an impact, sanders, cut-off wheels, .... If I could also spray some epoxy primer to cover bare metal and spray paint on small things like manifolds.
If this compressor can't do that I will start looking at a lesser one that is cheaper and will still get the job done for JUST air tools.
Thanks for the input.
My question is if anyone here is familiar with any guns that will spray (small stuff / not a whole car) with a lower rated compressor? I am looking at this one :
https://www.homedepot.com/p/Califor...-Free-Electric-Air-Compressor-20020/312624543
- Ultra quiet at only 70 dB
- Powerful 2.0 HP motor
- Oil-free pump produces cleaner air for better tool operation, less maintenance and costs
- 6.40 CFM at 40 psi, 5.30 CFM at 90 psi
- 20 Gal. steel air tank with wheel kit makes it easy to move around
- 125 psi maximum pressure
- Low amp draw - 14 Amp
- 2 pressure control gauges and 2 universal 1/4 in. quick connectors
- Easy-start valve for less starting amperage
- Thermal overload protector
- Time to fill tank from empty to full - 4-minutes
- 110-Volt/60 Hz
- Recovery time from 95 psi to 125 psi in 1-minute
- Less heat which dissipates more efficiently
I am just looking at running air tools like an impact, sanders, cut-off wheels, .... If I could also spray some epoxy primer to cover bare metal and spray paint on small things like manifolds.
If this compressor can't do that I will start looking at a lesser one that is cheaper and will still get the job done for JUST air tools.
Thanks for the input.