Missing copper crush washer high pressure line.

[MOA]

Anybody know where I can find the crush washer, brass/ copper.

????

Goes between the male to male fitting.

 

[toolmanmike]

Anybody know where I can find the crush washer, brass/ copper.

????

Goes between the male to male fitting.View attachment 1715535686

Parts store.

 

[Murray]

Yes, these are standard sizes.

 

[67Dart273]

.........And after you find one, it is likely way too hard. Been posted before, anneal it. Search that if you don't know how. You need a propane torch, or a gas /LP range

 

[69FBCuda]

Ace hardware

 

[MOA]

I've been to a few places. There is an ace in town, I'll try there.

The place that did the rebuild said they wouldn't sell me one. Part of a kit.

400 spent there. Stage 2 rebuild. I think I'll use somebody else next time.

 

[MOA]

Ace had these, copper rivets.

Auto parts store didn't have it, hydraulic supply didn't have it, ace did, go figure.

 

[MOA]

Looks like I got it wrong. The washer is much bigger than I thought. Goes here...

Not here...

I have a brass one that needs to be drilled out to .5".

I guess.

 

[NC Engine Builder]

You can buy a assortment of those from parts stores, or Amazon... allways handy to have around

 

[MOA]

Thanks for the help. Got it installed.

All that's left is install front anti sway bar, install Trans cross member, adjust gear selector, fluids, battery, fire it up....

Only took 5 years.