[WANTED] Need 1968 Barracuda Right Rear Lower Quarter

[blk340cuda]

Need a lower right rear quarter patch for a 1968 barracuda. Also looking for a 8 3/4 housing for "A" body and A833 Trans.

 

[mcpherson57]

You can get repops with the trunk extensions very reasonable.

 

[blk340cuda]

Didn't want repops, want a original piece lower cut from a parts car.....

 

[mcpherson57]

I have a bell housing and I think a 4 speed tranny. Located in West Branch. I think 3ird gear needs work. I have a lot of 67-69 barracuda parts. But no axle housings. Do you need a bell housing?

 

[blk340cuda]

Well let me know if you have the trans and maybe I'll do the package. Do you have any interior parts? I need a deluxe bucket and dash parts....

 

[68original]

I may have a lower patch from a 67 that would work.
How far up are looking to patch in?

 

[mcpherson57]

Hi, I found that 4 speed and the bell housing along with the pressure plate and clutch if your interested make me an offer.

 

[blk340cuda]

Lower patch would be perfect if 2 inches below marker light hole flat across to wheel well.

 

[blk340cuda]

What condition is the trans? Does it need gears? What type of pressure plate? Do you have any pictures? What year and gear ratio's.....

 

[mcpherson57]

pm sent

 

[mcpherson57]

4spd bellhousing

 

[mopardude318]

I have an auto metal direct lower patch panel for 68 if you might be interested

 

[blk340cuda]

I thought Auto Metal Direct only had full quarters, what the scoop?