Need part source

[Charrlie_S]

Looking for a source for new lower control arm pivot pin(s), for 63-66 "A" body.
I have no idea what is different from the 67 up pins, but different part numbers.
Don't have to be NOS, reproduction is OK, or really nice used.

 

[Tims 66 Cuda]

Classic Industries , Ebay

Tim

 

[Charrlie_S]

Tim, any chance you have a link? I can't find them on e bay, and They are not in Classic Industries catalog. Thanks

 

[Valkman]

PST just click on the right

 

[Tims 66 Cuda]

Check out part# H3005 page 356 In CI catolog

 

[Iron Oxide]

I bought a set for my '66 from PST, Charlie.
Suspension - Suspension Components - Pivot Shafts

 

[toolmanmike]

Looking for a source for new lower control arm pivot pin(s), for 63-66 "A" body.
I have no idea what is different from the 67 up pins, but different part numbers.
Don't have to be NOS, reproduction is OK, or really nice used.

Really nice used would require you to start a wanted thread in the classified forum. That might be the route to go.

 

[Charrlie_S]

Thanks, folks. I couldn't turn up any when I searched. Now I know I can get some, if it turns out I need them, when I take the suspension apart.

 

[Charrlie_S]

Really nice used would require you to start a wanted thread in the classified forum. That might be the route to go.

Gotcha, Mike. I will do that if it turns out I need some. Didn't want to do that yet, as I'm not ready to buy. Just wanted to make sure they were available.

 

[Murray]

Classic has been closed until recently, try again.

 

[toolmanmike]

Gotcha, Mike. I will do that if it turns out I need some. Didn't want to do that yet, as I'm not ready to buy. Just wanted to make sure they were available.

Hey Charley, it looks like Rockauto has them. 1966 DODGE DART 4.5L 273cid V8 Control Arm Shaft Kit | RockAuto

 

[Charrlie_S]

WOW. never thought to look there. I needed a set several years ago, and only found one source, which is no longer in business. So I was concerned about getting them if needed. Looks like there are many sources. Don't no why I couldn't find them using a search. Thanks everyone for the help.