Need Parts for my 68 Dart GT

[MuuMuu101]

Looking for parts for my Dart...

- 73+ UCA's and big bolt pattern spindles/hubs
- 8 1/4 or 8 3/4 rear end (would like one out of an A-body, but may be interested in in '62-63 or '65-67 B-Body rear end). Must be bbp. Looking for 3.55's or numerically lower gearing. A sure-grip is preferred; however, I will take an open geared diff.

Located in 91724. I'd like to pick up the larger stuff locally if possible but may be interested in parts being shipped if shipping is reasonable. If I see it in person, I'll pay cash. Otherwise, I'd pay with a check unless I can figure out how to use paypal (and I am more than willing to wait for my check to clear). If I'm interested in your part I will pm you back.

PM me if you have anything to sell. Thank you!

 

[barracudakid]

i have the push rod.
pm me

 

[highflyer]

Iv got bbp disc for sale..im in central cal..parts sre from a 73..
upper arms[2]
lower arms[2]with pins adjusters.old bushing removed
calipers like new no rust[2]
caliper brkts
spindles[2]
dust shields[2]
upper ball joint needs new boot[2]
lower ball joints one great and one not as good..need boots
strut rods [2]
lower arm bumpers[2]
brake lines like new[2]
dist valve with lines to master cyl..
all applicable bolts and nuts
parts lca uca cal/brkt strut rods spindles are cleaned crohoned primed and painted black
if interested or others fall thru.pm me..j
do not have rotors or bearings..
plus shipping from antiuoch cal or pick up..

 

[Jim Lusk]

I had a disc setup at Fall Fling (still have it, too). If you can't find something closer to home I'm only a few hours north. $300 plus shipping or pickup. If you pick them up I can include used rotors and caliper cores.

 

[MuuMuu101]

Just set up a paypal account today. I also forgot to mention, I'm going to need the driver's side, door window trim. This is the trim piece that fits between the driver's side door and driver's side rear window. As you can see, mine's a little bent...

 

[MuuMuu101]

Sorry for the misunderstanding about the pushrod. I actually needed an adjustable one (which I just ordered). Thanks for looking!

 

[autoxcuda]

Go to on of the local pick a parts and get the spindles, splash guards, and caliper adapters off of a F/M/J body. Volare, Diplomat, Cordoba, Aspen, etc...

Should cost you about $75 or most likely less.

http://www.pickapartauto.com/index.html

2025 S. MILLIKEN AVE.
ONTARIO, CA 91761

inventory: 1974 PLYMOUTH VALIANT, 1977 DODGE ASPEN

3333 S. PECK RD.
MONROVIA, CA 91016

inventory: 1977 DODGE DIPLOMAT,

SPINDLE/KNUCKLE $24.99 core: $3.00

Leave the caliper adapter attached to the spindle and call them one piece. They probably will charge you for a dust shield:

Ecology Wrecking Yard:

Santa Fe Springs - 13780 E. Imperial Hwy, Santa Fe Springs, CA 90670 -MAP - (888) 490-0178

Fontana - 15228 Boyle Ave. Fontana 92337 -MAP - (888) 490-0178

Rialto - 221 E. Santa Ana Ave., Rialto, CA 92316 -MAP - (888) 490-0178

 

[MuuMuu101]

Go to on of the local pick a parts and get the spindles, splash guards, and caliper adapters off of a F/M/J body. Volare, Diplomat, Cordoba, Aspen, etc...

Should cost you about $75 or most likely less.

http://www.pickapartauto.com/index.html

2025 S. MILLIKEN AVE.
ONTARIO, CA 91761

inventory: 1974 PLYMOUTH VALIANT, 1977 DODGE ASPEN

3333 S. PECK RD.
MONROVIA, CA 91016

inventory: 1977 DODGE DIPLOMAT,

SPINDLE/KNUCKLE $24.99 core: $3.00

Leave the caliper adapter attached to the spindle and call them one piece. They probably will charge you for a dust shield:

Ecology Wrecking Yard:

Santa Fe Springs - 13780 E. Imperial Hwy, Santa Fe Springs, CA 90670 -MAP - (888) 490-0178

Fontana - 15228 Boyle Ave. Fontana 92337 -MAP - (888) 490-0178

Rialto - 221 E. Santa Ana Ave., Rialto, CA 92316 -MAP - (888) 490-0178

Sorry, I just saw this now. Thanks for the link and the references. I will see if they still have them in inventory next week as I have finals this week.

And does anyone have that door trim piece? It's the trim for the rear window, like in the picture but for the driver side...