Need pics of the Z bar pivot 64-66 Barracuda/Dart/Valiant MT car

[Miranthis]

Title says it. the inner apron and the Z Bar stud bracket rotted away in the 1970's and the mechanic fabricobled this as a replacement:

My restoration guy needs pics of the area to fabricate the repair to the apron and the Z Bar pivot mount stud bracket. I have a pic or 2 of an A/T car apron, but not of the M/T apron. I do have the Service Manual illustration. REAL pics of a REAL M/T car would help A LOT.

 

[junkyardhero]

i posted some not too long ago, let me see if i can drag them up...

unfortunately i've sold the car since so i can't take more.

 

[Miranthis]

Another view of this before media blasting...

 

[RAT ROD AL]

 

[RustyRatRod]

This is as good as I could get. This is on a 64 Valiant. Slant 6 three on the tree. You just can see the top of the proportioning valve for location reference.

 

[chewy]

I bought one from Brewers after attempting to put a new ball stud into mine. I had added metal to the ball stud with the mig early on after the ball flattened on one side. The last clutch I did I replaced it all with new. The torque shaft was thinned and the ball studs were worn again because of the shaft.

 

[64Signet]

Hope these help

 

[Miranthis]

THANK YOU ALL. It looks like the bracket mounts so that the ball stud is centered on that have round cut out in the top of the frame. Is that a fair description?

I am subscribed to Brewer's for when the bracket comes back in stock. I do have a line on a used one I will pick up, in case the brewer's one does not come back in stock.