challenger57
cuda57
It was suggested to me to use Rotella for the startup oil in my new motor. Any other recommendations? Thanks
I used Mobil 5000 like $12 for 5qt jug at walmart. Bottle of lucas additive.
It's hard to see the logic in building an expensive engine and try to save 40 or 50$ on the break in oil.
VR1 or Lucas break-in oil
I agree w/ rusty, back in the day-the hemi never knew what oil was in it, and it didn`t make a tinkers dam. we always used 40 or 50 weight oil of a name brand, usually who ever furnished it. break-in or not, never had an oil related problem,or an additive either, course they all had zink back then
will probably use rottella 15w 40 for the break-in of the 505 when I start it.
just my 2 cents worth-----------bob:argue:
It was suggested to me to use Rotella for the startup oil in my new motor. Any other recommendations? Thanks
my next engine will be a roller cam motor and i wont have to worry about all this stuff anymore.
It was suggested to me to use Rotella for the startup oil in my new motor. Any other recommendations? Thanks
Not true if your going to be running a big cam with over 400# spring pressure and High HP, you still need the additive.
It was suggested to me to use Rotella for the startup oil in my new motor. Any other recommendations? Thanks