slant six
Do More With Less
Contact seller
3 PARTS CARBS:
Make offer on small parts shown in the parts tray, or mix 'n match. Better to go to you than the scrap bin, which is maybe where these parts belong anyway?. I just wanted to see if there is any interest here first.
Pictures of stuff below:
Choke Pull offs (untested - but can test if you want one - no use shipping a dead vacuum servo.)
Screws, Clips, other small parts in the tray - Make offer.
https://flic.kr/p/2ruqyC9]
20250919_214943[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr
CARB #1
# 3644S 1964-1967 440 / 426? 525 CFM?
Has Broken mounting ear on the base. Also has no secondary air valve above the secondary butterflies.
https://flic.kr/p/2ruqyCe]
20250919_215104[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr
https://flic.kr/p/2ruqEz8]
20250919_215057[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr
https://flic.kr/p/2rupmWT]
20250919_215053[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr
CARB #2
# 3854 S 1965 273 HP - 475CFM?
https://flic.kr/p/2rur4L5]
20250919_215043[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr
https://flic.kr/p/2rupmXE]
20250919_215036[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr
CARB #3
# 9627S 625 or 650 CFM? Non OE Carb
https://flic.kr/p/2rujYRQ]
20250919_215023[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr
https://flic.kr/p/2ruqyDG]
20250919_214951[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr
- JETS, RODS, STEP UP PISTONS, STEP UP PISTON COVERS ALL HAVE BEEN REMOVED / PARTED.
- FLOATS, AIR HORNS, VENTURI'S CHOKE PULL OFFS, FUEL INLETS, BAFFLES LINKAGES AND OTHER PARTS AVAILABLE.
Make offer on small parts shown in the parts tray, or mix 'n match. Better to go to you than the scrap bin, which is maybe where these parts belong anyway?. I just wanted to see if there is any interest here first.
Pictures of stuff below:
Choke Pull offs (untested - but can test if you want one - no use shipping a dead vacuum servo.)
Screws, Clips, other small parts in the tray - Make offer.
https://flic.kr/p/2ruqyC9]
20250919_214943[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on FlickrCARB #1
# 3644S 1964-1967 440 / 426? 525 CFM?
Has Broken mounting ear on the base. Also has no secondary air valve above the secondary butterflies.
https://flic.kr/p/2ruqyCe]
20250919_215104[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickrhttps://flic.kr/p/2ruqEz8]
20250919_215057[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickrhttps://flic.kr/p/2rupmWT]
20250919_215053[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on FlickrCARB #2
# 3854 S 1965 273 HP - 475CFM?
https://flic.kr/p/2rur4L5]
20250919_215043[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickrhttps://flic.kr/p/2rupmXE]
20250919_215036[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on FlickrCARB #3
# 9627S 625 or 650 CFM? Non OE Carb
https://flic.kr/p/2rujYRQ]
20250919_215023[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickrhttps://flic.kr/p/2ruqyDG]
20250919_214951[/url] by https://www.flickr.com/photos/149826863@N07/]Hyperpack[/url], on Flickr















