Pictures needed, Help!!

[plymouth67]

So my Duster was originally on the colum but, somebody prior to me converted to floor shifter. They put a slap stick out of an e body in it and didnt really have any sort of console. I have located an a body console and I think I have the correct shifter coming from a friend of mine. So what I need are pictures of the factory set up with the console out of the car. I need to see what the brackets look like and there locations for the shifter and the console. Hopefully somebody has a car tore apart or something where they can snap some pictures for me. Thanks

 

[71340Duster]

So my Duster was originally on the colum but, somebody prior to me converted to floor shifter. They put a slap stick out of an e body in it and didnt really have any sort of console. I have located an a body console and I think I have the correct shifter coming from a friend of mine. So what I need are pictures of the factory set up with the console out of the car. I need to see what the brackets look like and there locations for the shifter and the console. Hopefully somebody has a car tore apart or something where they can snap some pictures for me. Thanks

Don't have any pics for you, good luck though, would be hard to do w/o. Have you looked it up in factory chassis/body manual? Don't know if that would help anyway.

 

[Tooljunkie]

From a 69 barracuda i think. No measurements.
I met a gentleman that had made up templates for the brackets as you see in a couple photos. Its a start.
I have a complete setup, still in the duster but havent pulled console yet.

 

[plymouth67]

View attachment 1715394648 View attachment 1715394649 View attachment 1715394650 View attachment 1715394651 View attachment 1715394652 View attachment 1715394653 From a 69 barracuda i think. No measurements.
I met a gentleman that had made up templates for the brackets as you see in a couple photos. Its a start.
I have a complete setup, still in the duster but havent pulled console yet.

View attachment 1715394648 View attachment 1715394649 View attachment 1715394650 View attachment 1715394651 View attachment 1715394652 View attachment 1715394653 From a 69 barracuda i think. No measurements.
I met a gentleman that had made up templates for the brackets as you see in a couple photos. Its a start.
I have a complete setup, still in the duster but havent pulled console yet.

You wouldnt happen to have a set of those brackets would ya???

 

[67Dart273]

I believe it was redfish on here posted a diagram of the measurements. Do a search of this site

fabo console mounting location - Google Search


Console Mounting Bracket Template

 

[George Jets]

Here is a layout for a 72 Duster conversion to bucket seats / console.

 

[Tooljunkie]

You wouldnt happen to have a set of those brackets would ya???

I only needed the one set, should have copied the templates for future use. I retuned them to owner. He’s too far away to do it again.