pitman arm?

[03ramit1]

I have a 75 duster, and i picked up a used gear box, to convert it to manual steer, and the power pitman arm does not work. (wont hold tight as the shaft on the gearbox is too small for the pitman arm) anyone know a part number to get the one I need? thanks a bunch.

 

[blown71duster]

Moparts has a good tech article on this subject:

http://www.moparts.org/Tech/Archive/steering/14.html

You must have an earlier gearbox ,as the later ones are larger , moog part number for the early box for a body

http://www.moog-suspension-parts.com/proddetail.asp?prod=MOOG-K7074&PARTNER=gbasesecname&Sec=7945

 

[70aarcuda]

In 1973 the diameter of the shaft on the steering boxes changed....your 75 duster has the larger diameter pitman arm..where as the new steering box you got has the smaller diameter splines....

 

[604 Racing]

i belive pre 73 are diferent, the boxes that is,

i went all 73+ frontend stuff on both my 71 dart, and 68 dart.

 

[03ramit1]

I can't remember what the box came out of. But I know it was a 60 something. I wanna say valliant, but I could be wrong. I'll have to grab the moog arm listed above and give it a shot. Thanks for all the help guys. This place rocks.