QA1 K-Member

[Jeff Clay]

Looking to use a QA1 K-member in my 1970 Dodge Dart. I've built a 383 Big Block Stroker for the car and need to find out what kind of "motor mounts" will work for this application. Any help would be greatly appreciated. Thanks :banghead:

 

[70aarcuda]

The Mopar A-Body K-Member is designed for small block engine mounts and 1973-76 A-Body sway bar. The B & E-Body K-Members are designed for big block engine mounts and E-Body and 1971-72 B-Body sway bar.

http://www.qa1.net/qa1_motorsports/...ion-components/k-members/mopar-k-members.html

right from there website...

 

[Jeff Clay]

Thanks for the comments. I too have read the information on QA1's website. I was informed by Mancini's that they will work for big block applications. But, they weren't able to tell me what motor mounts will
work.

 

[bOb shingler]

use the engine pieces off any "B" or "RB" motor that's not from a truck and the insulators off a pre 70 "B" body or the after market solid ones of pre '70.

 

[wazoo64]

I believe the QA1 kmember is the CAP kmember. If so make sure you have a good life insurance plan.

 

[70aarcuda]

i believe the qa1 kmember is the cap kmember. If so make sure you have a good life insurance plan.

lol.....