Questions about 74 Dart front end

[California Dart]

OK, so I rebuilt the entire front end and installed Bilsteins (I highly suggest for everyone) all around. The difference is night and day. My next step is sway bars and rear custom leaf springs.

Now the passanger side front end bottoms out on dips. Is that worn torsion bars or a bad rubber stop? The drivers side does not bottom out even though the driver is 250 lbs.. This is going to be a daily driver and quality ride is at the top of my list. What torsion bars would be best for that and where can I get the best deal on a pair?

Thanks to all who suggested tips on my last post.

 

[abodyjoe]

What bars are in it now? And what motor is in it?

I like the 1" bars from just suspension. The last two years they have gone on sale for around $159 at Christmas time.

 

[California Dart]

The bars are stock and I have a 318.

 

[California Dart]

Just Suspension suggests "1" tourning bars".

 

[abodyjoe]

Yea. Those are the ones I was talking about. Like I said if your not in a huge rush I would wait a few weeks and keep an eye on eBay to see if they go one sale.

 

[California Dart]

Man, I love how your car sits. I had a 57 Chevy that sat the same way. Do the better torsion bars keep it front bottoming out in the front?

 

[abodyjoe]

Do the better torsion bars keep it front bottoming out

sure they do. they are your front springs.

 

[California Dart]

End. got the 1". thanks to everyone for the tips.

 

[California Dart]

Fixed, done.