[Found!] rear torsion bar mounts

[abdywgn]

this is the "sleeve" that holds the rear of the torsion bar to the crossmember. It also has the retainer clip and boot attaching points. If you've replaced your rusty crossmemeber and have these left over, give me a shout! Thanks! Bob

 

[SGBARRACUDA]

PM sent

 

[abdywgn]

replied

 

[Lee Robinson]

replied

Year and Dart or Valiant?

 

[abdywgn]

looking for the cylinder the t-bars slide thru in the rear and not the whole cross member

 

[69FBCuda]

Are they all the same ?

 

[Kernel Sanders]

So your just looking for the torsion bar anchors/socket with clips?
If so I have a pair, will post pics tonight when I get home

 

[abdywgn]

Are they all the same ?

View attachment 1715438459

I'll say yes if they are for an A-body.

 

[abdywgn]

So your just looking for the torsion bar anchors/socket with clips?
If so I have a pair, will post pics tonight when I get home

yes, the sockets (better name than what I called it). Clips not needed.

 

[69FBCuda]

I'll say yes if they are for an A-body.

I would have to pull the parts, let me know if your interested.

 

[FC7Demon340]

Would these be the same on a 68 Coronet? I cut the torsion bar brace out of one for a guy a year ago. He backed out on it after i did it. So if they are the same I'll cut them off the brace for you

 

[Kernel Sanders]

Ok here are pics of what I have, they were cut out of a bent up Isolated torsion cross member from a 74 charger. I dont know why I kept them but I did. lol

I'm not sure if they are the same as Abody as I've never compared them.

 

[Kernel Sanders]

looking at 69FBCuda's pic (post #6), it seems like mine have the clip way down in the socket not near the end. so they may not work for you

 

[halifaxhops]

I should have them on a 65 cuda I could cut out. PM me if that will work.

 

[abdywgn]

looking at 69FBCuda's pic (post #6), it seems like mine have the clip way down in the socket not near the end. so they may not work for you

I saw that also. Did not know they had them in different spots. Thank-you for educating us! Bob

 

[abdywgn]

I should have them on a 65 cuda I could cut out. PM me if that will work.

may have a pair coming from WI, will keep you posted.