yellow rose
Overnight Sensation
I think that tranny is an NP435
You can make that tranny fit your car by cutting the floor up pretty bad.And the rear crossmember. I think the shifter will come up through the dash and end up close to the mirror.
The ratios in it are for a grain truck. It has an un-synchronized granny gear in it that is somewhere between 6:1 and 10:1 IIRC. It is an agonizingly slow shifting unit, cuz the guts, like the case weigh about double of an A833. The splits in it are for a truck. It is a truck tranny.
The pressure plate is an 11 inch tank of a thing, suitable for low rpm operation and towing stuff. IIRC the bellhouse is cast iron. The tail on it may still have remnants of a parking brake on it, and you can bolt a PTO on the side and use it to operate any hydraulics you have in mind. The M/S weighs about as much as my wife did when I met her. But that's OK it's only about a foot and a half long.
If you need help rebuilding it call me, I have built hundreds of those. Many hundreds.
In the unlikely event that it is an A833.........SCORE!
I think it would be cool to have the shifter come through the dash and end up at the mirror. It would be unique.
And if you want it shift a bit easier, slick shift, or better yet face plate that maternal fornicate. That would be real cool!