[Found!] Rocker arm adjusters

[Donnie514]

I need a complete set (16) of new rocker arm adjusting screws for small block Mopar.

 

[ir3333]

if you are looking for original mopar interference fit adjusters go rob a discarded slant six.

 

[Donnie514]

Are they identical ?

 

[toolmanmike]

I think I bought new ones at the parts store. Let me check Rockauto

 

[toolmanmike]

Napa has them. Sealed Power# 1933. $3.21 each at my store. https://www.napaonline.com/en/p/SEP...r+Arm+Adjusting+Screw&keywordInput=rocker+arm

 

[Jadaharabi]

Forget those interference Fit pieces of crap. Run a tap down through the hole to clean up the threads and then use these with the lock nut, you take a flat file and dress the set area for the nut so that it is flat.



Crane Cams 99802-16: Shaft-Type Rocker Arm Adjusting Screws Chrysler V8 "LA", "B", and 426 Hemi with Locknut | JEGS

 

[ir3333]

i used slant six adjusters to replace the worn ones in the stock adjustable rockers i used for my 372
you'll probably find them free...most guys pull and never use slant sixes.

 

[physixx]

I have a set for the cost of shipping if that helps.

Ken
Edison, NJ

 

[Donnie514]

physixx, Please contact me.

 

[moparwillie52]

I have a complete set of factory small block adjustable rockers. I can send u better pics if interested.

 

[pishta]

I took 12 adjusters off a 6, just put them in a bag. PM me

 

[Donnie514]

Well guys, sorry I did not post this Friday evening but a very kind A Bodies member sent me a set.
I should of up dated this 36 hours ago. I would like to thank the two members that robed them off of some motors and offered them to me.

 

[toolmanmike]

Well guys, sorry I did not post this Friday evening but a very kind A Bodies member sent me a set.
I should of up dated this 36 hours ago. I would like to thank the two members that robed them off of some motors and offered them to me.

If you now have what you need please mark the ad "found". Thanks

 

[Donnie514]

How do you do that. If I would of known I truly would of done it. SORRY

 

[toolmanmike]

How do you do that. If I would of known I truly would of done it. SORRY

Just under the title on your first post. " Mark [Found!] "