Rocker ID for 440 help

[Drache]

Ok I'm hoping someone might have an idea. Need a rocker, just one. Mechanic can't figure out exactly which rocker it is. Says it is stamped only TE5 yet the one next to it is stamped TE6 and some don't have any markings at all. Sorry I don't have pictures due to me being out of town. Hoping this might spark some ideas? He's hoping to just replace the one and not all of them. He's not a MOPAR guy.

 

[TrailBeast]

I don't know if it will do you much good or not, but I did a google search for "440 rockers with TE5 marked on it" and came up with a few articles asking the same question about the markings.

Here's one from another Mopar site that had the same thing happen, and also had the same question about the markings.
http://a12mopar.com/yabb/YaBB.pl?num=1358829005/10

Sorry, but it's all I could find on it.
Maybe try 440source and see if they know.

 

[Drache]

I don't know if it will do you much good or not, but I did a google search for "440 rockers with TE5 marked on it" and came up with a few articles asking the same question about the markings.

Here's one from another Mopar site that had the same thing happen, and also had the same question about the markings.
http://a12mopar.com/yabb/YaBB.pl?num=1358829005/10

Sorry, but it's all I could find on it.
Maybe try 440source and see if they know.

Yeah searching google is the first thing I try, read through the same page.

Thanks anyways though!

 

[bOb shingler]

the motor has two different rockers on it, 8 exhaust and 8 intake. just get 1 that is the same off any bbm.

 

[Dartnut]

Pictures would definitely go a looooooong way here.......
I take it that they're aren't factory rockers.
The question that comes to mind for me to you (After reading your other thread on this subject as well) is if this one is bad, how far are the other ones behind in terms of failure?
It seems like as you described it, that it was related to rocker fatigue rather than a stuck valve of valvetrain geometry problems.
I would be checking out a new set if i were you and replace them all and be done with it.

 

[dukeboy440]

your pics in the other thread look like standard factory style rockers to me. Perhaps a generic set from a parts store or even just factory rockers.

I've got a complete spare factory set, illl check them for numbers this evening.