Roller tip rocker adjustment?

[19blockhead72]

If you actually have W-2 rockers then half of the rockers should have the adjuster offset. Is that what you have?

No they are centered, the guy I bought them from was just speculating as to why they were so far off.

 

[yellow rose]

No they are centered, the guy I bought them from was just speculating as to why they were so far off.

Then they aren't W-2 rockers if they aren't offset.


Edit: They won't be BB rockers if all the adjusters are centered. The BB rocker has adjusters that have a small offset for all the rockers.

 

[19blockhead72]

New shafts.

 

[jimjimjimmy]

No they are centered, the guy I bought them from was just speculating as to why they were so far off.

if the intake rocker was for w2 it would be out of wack way more than that say about 0.550 .

 

[Rocket]

If he was using W2 exhaust rockers on the intakes and exhaust valves then there would be no offset. Since there was no mention of them being way off to the sides that may be what he has.

 

[yellow rose]

If he was using W2 exhaust rockers on the intakes and exhaust valves then there would be no offset. Since there was no mention of them being way off to the sides that may be what he has.

I'm lost. All the rockers are the same on Pcar heads. Only the intakes are offset on W-2's. W-2's take the same exhaust rockers as Pcar heads.