[WANTED] Schumacher A67LA 318 to 360 conversion engine mounts

-
Status
Not open for further replies.
doug 371 said:
you can use your mounts with a minor modification to the driver side
Click to expand...
I have a couple extra mounts laying around that look different (taller) than some of the 318 stuff. I wonder if they are for a 360. Will stock 360 mounts bolt right into the v* K-member and place the engine in the proper location for the headers etc. to have the best chance of fitting? Would all LA 360 mounts be the same regardless of whether they were in a pas car or a truck?
 
n
Bob Wilkie said:
I have a couple extra mounts laying around that look different (taller) than some of the 318 stuff. I wonder if they are for a 360. Will stock 360 mounts bolt right into the v* K-member and place the engine in the proper location for the headers etc. to have the best chance of fitting? Would all LA 360 mounts be the same regardless of whether they were in a pas car or a truck?
Click to expand...
no. they have to be a body
 
abodyjoe said:
doesn't say out of stock.. or follow the ebay link i posted,
Click to expand...
It doesn’t say out of stock when you first go to the item page, but then you have to use the pull down menu to choose the 360 version and that’s when it says out of stock
 
Status
Not open for further replies.
-

Back
Top