[WANTED] slant six two Barrel Intake, anyone?

[oldmopardude]

First off, I want to say thanks to the FABO site! I found this Demon here in April, from "wayoutwest", and after a long drawn out affair of negotiating, inspecting, and transporting, it has arrived! I'm thinking about Installing a two Barrel manifold on my 225 slant 71' Demon. next year, I intend to install a 68' 340 GTS Drivetrain, K member to 8 3/4 rear. sittin here, But for now, I would be happy with a two barrel intake. Does anyone have one?
And again, I really appreciate everybody on this site!

 

[valiantpatrol]

Congratulations on your purchase. The Demon looks to be in very nice shape.

 

[MOPARMITCH]

Is that color code GG1 Green??

 

[krazykuda]

Lemme see if I can find any....

 

[hemi71x]

http://www.slantsix.org/articles/supersix/article.htm

Read this tech article.
Should be of help to you.
Lot's more to it, than just trying to bolt on an intake manifold.
If you have an automatic, your going to be needing the unique kickdown rod to go along with that system, and those cost lots of $$$$$$$ these days.
Good luck. Hope someone has what your looking for, and will be needing.
http://www.forabodiesonly.com/mopar/showthread.php?t=145942

 

[krazykuda]

I have a couple:


Plan A:

View attachment Slant 2bbl A01 B2.jpg


Plan B:

View attachment Slant 2bbl All B2.jpg

 

[oldmopardude]

Thanks! I knew looking at it further that the linkage would be the next obstacle. Any particular year for a parts car I can look for to have the parts? I like the avatar! I used to work on the RF-4 in 1979.