[SOLD] small ball joint socket for large ball joint socket

[grjammer]

Need the large socket. 1/2" drive Will trade small socket, 1/2" drive.
Thanks!

 

[4spdragtop]

Definitely interested, gotta chk mine to be sure of size.

 

[RAT ROD AL]

I definitely could use one of these. What is the measurement of the small BJ

 

[S'cuder]

I definitely could use one of these. What is the measurement of the small BJ

1.78" plus or minus a couple hundredths.

 

[4spdragtop]

Here's the set I have, it's actually a 2pc...
2 9/64 and the other socket is 1 59/64.

 

[RAT ROD AL]

I just measured my small ball joints and they measured 1 13/16"

 

[Dana67Dart]

I have one that is a matco SPS32

It measures

1.918 flat to flat. (1-29/32?)

3/4 drive

When I did my 67 ball joints it felt loose so I assume it is for the BBJ.

 

[grjammer]

I am still looking for a trade. I need the large bj socket. 1/2 inch drive
Thanks

 

[Dana67Dart]

I'm In for a swap. You just need to get a 1/2 to 3/4 adapter or better yet a 3/4 torque wrench.