MOPAROFFICIAL
Oogliboogli
Looks like 1.88/1.60 valves.
Noone here disagreed with you on the year or what they came off of. That is a later casting number so I said 80s you said 1976 i never disagreed with you. Then someone said something about the valve size . Noone is disputing you !? That casting number is also found on 318 4bbl engines which used 360 heads and intake. I think they where used from 75-84. As for the valve size I have no idea I have never had of those heads my 360 heads have 1.88 intake valves and my 318 has 1.78. I personally have never seen a stock 360 head with 2.02 valves but that doesn't mean nothing.
It's all good brother I was just clarifying that noone was disputing you. Sometimes its hard to interpret ppls responses thru text lol no apologies needed.I wasnt arguing I dont really dont know either that why I posted the pics so if someone on here know they could educate me on it , sorry if i came of like i was argueing cause that was not my intent so please forgive me if it did
thanksYes bore is 3.91
It's all good brother I was just clarifying that noone was disputing you. Sometimes its hard to interpret ppls responses thru text lol no apologies needed.
That would be cool! What's it going in?i think I will be in the market for a 360 block, my intent was to build a 408
1975 square body dart not the duster body styleThat would be cool! What's it going in?
Cool that's what mine is too 75 swinger1975 square body dart not the duster body style
I used a thin layer of grease on the mateing surface of the head to hold the plexiglas to the head. What's the wd40 for?Back to the original question. Set you heads chamber up on a level horizontal surface. Spray some WD40 in the chamber and use a medical syringe they have clear graduations mark on the side. Your no building a pro stock engine so will be near enough.My J heads that have been messed with over the years are 60 cc's.
well im not sure about that on mine cause the title say dart sport coupe no swinger imblems sonot sure n cant find one with the funny lookin grill that its gotCool that's what mine is too 75 swinger
I used a thin layer of grease on the mateing surface of the head to hold the plexiglas to the head. What's the wd40 for?
we did that when i got it in 88 whit state troopers cause it had mississippi titleIs it the one in your avatar picture? That's a swinger. They had two 2 door body styles in 75 a coupe (sport) and a 2 door hardtop (swinger) may be you got the wrong title? What is the first 4 of your vin number match it up with the first 4 on your title vin number!
the first four are LH23we did that when i got it in 88 whit state troopers cause it had mississippi title