Speed master LA heads

-
just find some magnum heads that have been setup well.
I have some i pulled off a 360 and I'm really tempted to put them on the 318 in my truck along with a small cam...
 
The Edelbrock foundry is still operating in San Jacinto, Ca.

The old Headquarters building in Torrence has been closed.
The new headquarters location is in Olive Branch, Ms.
The bulk of the machining of the castings(from the foundry) used to be done in Torrence.
Now the heads are being machined at the foundry in San Jacinto, and the manifolds are being machined in Olive Branch.

Heads and manifolds are still cast and machined in the USA.

Olive Branch is also the new main distribution center.
 
The Edelbrock foundry is still operating in San Jacinto, Ca.

The old Headquarters building in Torrence has been closed.
The new headquarters location is in Olive Branch, Ms.
The bulk of the machining of the castings(from the foundry) used to be done in Torrence.
Now the heads are being machined at the foundry in San Jacinto, and the manifolds are being machined in Olive Branch.

Heads and manifolds are still cast and machined in the USA.

Olive Branch is also the new main distribution center.
Thanks Dwayne. I’m sure that makes us all feel/sleep better. Kim
 
-
Back
Top