Slantsix64
Well-Known Member
Hey guys was wondering how much hp and torque I could gain going from stock ported magnum heads with upgraded springs to edelbrock heads!
The camshaft is mild 220@50 .479 lift
If I would do this I would probably use a 236@50 duration with .550 lift camshaft grind or something along those lines.
This is just a guesstimate throwing a idea out there!
The camshaft is mild 220@50 .479 lift
If I would do this I would probably use a 236@50 duration with .550 lift camshaft grind or something along those lines.
This is just a guesstimate throwing a idea out there!
