Stop in for a cup of coffee

[toolmanmike]

That have all the ignition stuff? Price is right and the right year range. Kind of misleading cover.

Looks like ignition and switches

 

[No name needed]

I got about 1/2 inch in the walkway.
Time to pull out the plow truck.

 

[toolmanmike]

I got about 1/2 inch in the walkway.
Time to pull out the plow truck.

Damn, time for the Sno Go

 

[dukeboy440]

See below


That would be difficult

Must have for forklift work. Got my Snap On set like 30 years ago. McMaster has good ones, I believe the brand is Martin

Mainly need for the big ring on the tailshaft

Good Morning

View attachment 1715119522

Yep but I know mine never would work in the one from my charger. I need to find a pair that works

 

[zkx14]

I also want him to make me something with a narrow shaft and a disk? on the end to drive them out, has to be crescent shaped, been using a long punch but can see sometime damaging a housing, prob on someone's rare *** one. Tried a inside bearing puller just to awkward to use. He is making me a burinishing bar also that I can just use cutting compound on to align the new ones, hardly ever do it but a must when you change out the bushings in them.

Did a slick rig with a Woodruff key to remove a needle bearing for one of the guys at work last week. Had two holes to go through to catch the edge of the outer race. But he had already knocked all the needles out and broken both the edges. I slipped a woodruff key in above it to catch what was left. went side to side and tapped it out...

 

[FISHYPETE]

Good morning, it's time for my morning coffee and Mopar fix. Thanks Toolman and Straight line speed for the early Christmas gift........Awsome

 

[zkx14]

Yep but I know mine never would work in the one from my charger. I need to find a pair that works

I think I did mine with needlenose pliers

 

[jaws]

Morning all, little sore today. Duke boy, this is what I drug Home yesterday. Probably sell for parts. Lot of work digging it out.

 

[MOPARMITCH]

View attachment 1715119516

Call on the phone, I know exactly what they all are. @halifaxhops

 

[MOPARMITCH]

Did a slick rig with a Woodruff key to remove a needle bearing for one of the guys at work last week. Had two holes to go through to catch the edge of the outer race. But he had already knocked all the needles out and broken both the edges. I slipped a woodruff key in above it to catch what was left. went side to side and tapped it out...

There's a tool for that also...Comes in two different sizes

 

[zkx14]

Morning all, little sore today. Duke boy, this is what I drug Home yesterday. Probably sell for parts. Lot of work digging it out.

View attachment 1715119533

View attachment 1715119534

View attachment 1715119535

View attachment 1715119536

View attachment 1715119537

View attachment 1715119538

View attachment 1715119539

View attachment 1715119540

View attachment 1715119541

Easy fix

 

[zkx14]

There's a tool for that also...Comes in two different sizes

Got a pic, make, part no ?

 

[MOPARMITCH]

Got a pic, make, part no ?

Lemme look

 

[MOPARMITCH]

Here..
KDT41710 | Driveshaft And Axle | Vehicle Specialty Tools | Product Categories | Tools | ToolWEB Site

 

[krazykuda]

wonder how @krazykuda made out with the one he picked up? Price was right for sure.

We haven't had time to trouble shoot it yet...

 

[MOPARMITCH]

Thats my price, through my tool distributor@zkx14

 

[krazykuda]

There's a tool for that also...Comes in two different sizes

That's what she said...

 

[zkx14]

Here..
KDT41710 | Driveshaft And Axle | Vehicle Specialty Tools | Product Categories | Tools | ToolWEB Site

Hmmm... that wouldn't have worked for what I described case there was only about 1/4" space past it. I have had a few jobs they could have worked on. Just need to custom make to the right diameters.

 

[krazykuda]

Yes,, They are flat on the end, and the shaft usually does not taper

That's what she said...

 

[krazykuda]

Yes....It's called old age.

sorry to hear, maybe you are only as old as you tell yourself.

I felt so old when I turned 30 but now I tell myself I am a pup and I feel better

Oh I feel like 30 in my mind but my body seems to tell me otherwise.

You are only as old as the women that you feel...

 

[krazykuda]

What does it do? The wood bar?

A wood bar is a place where wood goes to drink...

 

[No name needed]

A wood bar is a place where wood goes to drink...

One wonders what a WOOD bar would do, if a WOOD bar would do WOOD.
My brain hurts.

 

[Ben Drinkin]

One wonders what a WOOD bar would do, if a WOOD bar would do WOOD.
My brain hurts.

He'd do as much wood as wood bar could if a wood bar could do wood..

 

[GeorgeH]

g'day peeps

 

[dukeboy440]

Howdy George. How's things

g'day peeps