Stop in for a cup of coffee

-
halifaxhops said:
Any one know what master I can Bolt on with 4 holes and equal capacity reservoir's before I do a ton of searching? Seems like all 4 disks are dragging and I adjusted the pushrods all the way back. the one I am using right now is a stock drum/disk 15/16 bore.
Click to expand...


Call the Ram Man. He's a really nice guy and will teach you what you need to know about your brake system. He reconditions brake parts and sells them. He will tell you what you need to do and may have the parts that you need to do it. He's helped me a few times:


http://www.theramman.com/

817.691.5996

The Ram Man
7200 Winters St.
Fort Worth, TX 76120
 
Good fun loving folks are hard to find these days Karl, The ones I have met are special and they sure shine when I meet the half trash of the world, your a good man, you know what it's like to put a smile on some one's face by giving or helping .
 
krazykuda said:
Call the Ram Man. He's a really nice guy and will teach you what you need to know about your brake system. He reconditions brake parts and sells them. He will tell you what you need to do and may have the parts that you need to do it. He's helped me a few times:


http://www.theramman.com/

817.691.5996

The Ram Man
7200 Winters St.
Fort Worth, TX 76120
Click to expand...

Mine is not stock I am using the rear disks from a Cherokee (8 1/4) so it might be hit or miss.
 
I was looking at the scarebird stuff but really cannot find what master they are using. I tell you what that car stops nice!
 
halifaxhops said:
Mine is not stock I am using the rear disks from a Cherokee (8 1/4) so it might be hit or miss.
Click to expand...

He hooked me up with a manual master cylinder for my 66 Valiant wagon that I can use with disc brakes. I'm converting it from single reservoir 9" drum to double reservoir with front KH disc in front and 10" drum in the rear (manual).

He knows what will swap back and forth. Give him a call, the worst he can say is he doesn't know and can't help you, the best case is he may know and have one that will work for you...

What have you got to loose but 5-10 minutes of your life???
 
krazykuda said:
Call the Ram Man. He's a really nice guy and will teach you what you need to know about your brake system. He reconditions brake parts and sells them. He will tell you what you need to do and may have the parts that you need to do it. He's helped me a few times:


http://www.theramman.com/

817.691.5996

The Ram Man
7200 Winters St.
Fort Worth, TX 76120
Click to expand...
I have talked to him Karl :color: and like you say he is very nice and a great brake man and knows what he is talking about, I am going all out on his MoPar front disc set up he puts together :glasses7: All mopar baby :cheers:

halifaxhops said:
Mike, Nice of you to go visit your friends there!
Click to expand...
It is a trip I have been wanting to take Ray, even more after what happened to Pete and Keith, hope I can help add to there life these days and see they are moving forward :color:
 
memike said:
Good fun loving folks are hard to find these days Karl, The ones I have met are special and they sure shine when I meet the half trash of the world, your a good man, you know what it's like to put a smile on some one's face by giving or helping .
Click to expand...


Thanks. I know that you're the same way Mike... :prayer:
 
So what are the plans today? Mine is to get more strings up in the hop field. Takes a while and to find minnows for the pond. I added 2 pounds last summer and have not seen one this spring. I guess the small mouth and Sunfish eat them over the winter! LOL Never had bass in there before last summer and they were just fingerlings now the ones I saw are around a foot.
 
memike said:
He is a fun man to talk to and is all about America and mopar :glasses7: you can watch his teaching's on brakes on u-tube :glasses7:
Click to expand...

I didn't know that he had videos on you-tube. I'll have to look for some of them...
 
halifaxhops said:
So what are the plans today? Mine is to get more strings up in the hop field. Takes a while and to find minnows for the pond. I added 2 pounds last summer and have not seen one this spring. I guess the small mouth and Sunfish eat them over the winter! LOL Never had bass in there before last summer and they were just fingerlings now the ones I saw are around a foot.
Click to expand...

Add some crawl dead to it yet ? a few cat fish will help mud the bottom in with there poo :coffee2:
 

The oldest boy and I are getting working on his 71 Valiant more door. We looked at the new fuel line yesterday and have to figure out how it's routed and mounted. Then get all of the clips and secure it.

Then to the parking brake cables. See if we finally have the proper ones and if they fit...

I need to get some pictures of a 71 a-body fuel lines to look at...
 
You must log in or register to reply here.
-

Similar threads

E
ESPO Springs n Things
Replies
16
Views
429
RustyRatRod
RustyRatRod
ocdart
Bye, bye Parnelli...there's a spot on the front row waiting for you
Replies
12
Views
777
Chargervert
C
Johnny Mac
Stop in and see BluePrint Engines at Carlisle 2025! First time attending! Show Specials :)
Replies
8
Views
745
Johnny Mac
Johnny Mac
340six
Interested in a different type of build thread
Replies
3
Views
271
340six
340six
HawkRod
2025 Carlisle FxBO Tent Luncheon
2
Replies
26
Views
2K
Kern Dog
Kern Dog
Back
Top Bottom